VeriFone VX 680 Installation Guide

TERMINAL SETUP
VX 680 Bluetooth
®
Support
VX 680 INSTALLATION GUIDE 25
Bluetooth
®
AP
Charging Base
Station Connector
Sockets
Communication with the Bluetooth
®
Base Stations are encrypted according to the
Bluetooth
®
Standard. VX 680 terminals that are not paired cannot communicate
with the Bluetooth
®
AP Charging Base Station.
There are three connector sockets on the Bluetooth
®
AP Charging Base Station,
as shown in Figure 9:
Power Socket
The Bluetooth
®
AP Charging Base Station is powered using the Plugtop Adapter
and must be powered ON at all times once the Bluetooth
®
AP Charging Base
Station has been initialized. The Green LED on the Bluetooth
®
AP Base Station
will be lit when the power supply is connected.
RJ45 Socket
This would be used for connection to a LAN or ISDN.
Modem Socket
The Bluetooth
®
AP Charging Base Station has a built-in modem for connecting to
the standard telephone network. The Amber LED is only lit while the Bluetooth
®
AP Charging Base Station is online.
.
Figure 9 Connection Ports on the Bluetooth
®
AP Charging Base
Station (Bottom View)
RJ45
POWER
MODEM

VeriFone VX 680 Specifications

General

Display	3.5” QVGA (320 x 240 pixels) color LCD with backlight
Connectivity	Wi-Fi, Bluetooth, Ethernet
Processor	400 MHz ARM11 processor
Memory	128 MB Flash, 64 MB SDRAM
Operating System	Verix
Card Readers	MSR, EMV smart card reader, contactless/NFC
Printer	Integrated thermal printer
SAM Slots	3 SAM slots
Peripheral Ports	RS-232 port, USB port
Power Supply	AC adapter (100-240V), Battery backup
Weight	500g