TERMINAL SETUP
Conducting Wireless Transactions
46 VX 680 INSTALLATION GUIDE
Conducting
Wireless
Transactions
To conduct a wireless transaction:
• Ensure the terminal is in an optimal position for transmitting.
• Follow the on-screen instructions provided with your application.
Conducting
Smart Card
Transactions
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
To Conduct a Smart
Card Transaction
1 Position a smart card with the contacts facing upward (see Figure 35).
2 Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
3 Remove the card only when the application indicates the transaction is
complete.
Figure 35 Inserting a Smart Card
Conducting
Bluetooth
®
Transactions
To conduct a Bluetooth
®
transaction:
• Ensure the terminal is paired with the Bluetooth
®
AP Charging Base Station
not more than 100 meters away.
• Follow the on-screen instructions provided with your application.
Do not remove the smart card in the card reader until the transaction is complete.
Premature card removal will invalidate the transaction.
To Next Page
Loading...
Need help?
General
