02 / CONFIGURING YOUR VERIZON BUSINESS
INTERNET GATEWAY
22
http://setup.verizon.com/businessinternetgateway |
©2024 Verizon. All Rights Reserved
2.1 a/ CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and Internet, then select View
Network Status and Tasks.
2. In the View your active networks – Connect or disconnect section,
click Local Area Connection in the Connections field. The Local Area
Connection Status window displays.
3. Click Properties. The Local Area Connection Properties window
displays.
4. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties. The
Internet Protocol Version 4 (TCP/IPv4) Properties window displays.
5. Click the Obtain an IP address automatically radio button.
6. Click the Obtain DNS server address automatically radio button, then
click OK.
7. In the Local Area Connection Properties window, click OK to save the
settings.
8. To configure Internet Protocol Version 6 (TCP/IPv6) to use dynamic
IP addressing, repeat steps 1 to 7. However for step 4, select Internet
Protocol Version 6 (TCP/IPv6) in the Properties option (refer to IPv6
section for Gateway configuration).
To Next Page
Loading...
