SETTING CONTENT CONTROLS
DMZ host - DMZ host allows a single device on your primary network
to be fully exposed to the internet for special purposes such as an
email server. To access the DMZ host page, click the setup button.
For additional information, refer to the section in Chapter 5
Configuring Advanced Settings.
DNS Server - DNS Server manages the DNS server host name and IP
address. To access the DNS Server page, click the setup button.
For additional information, refer to the section in Chapter 5
Configuring Advanced Settings.
– Device Connection
• This section provides the device MAC Address, Access Point
information the device is connected to as well as the IPv4 Address of
the device.
• This section displays Connection information of how and how well
the device is connected to the Access Point. It also displays the
Network related information, including IPv6 addresses and a Ping
Test option.
4.1/ SETTING CONTENT CONTROLS
4.1 a/ ACTIVATING CONTENT CONTROLS
You can create a basic access policy by using the provided Rule Templates for
any computer or device on your Gateway network. Content Controls limit internet
access to specific websites based on a schedule that you create.
Access can be limited on specific websites or keywords embedded in a website.
For example, you can block access to the ‘www.anysite.com’ as well as block any
website that has the word ‘any’ in its site name.
To Next Page
Loading...
