bASIC SETTINGS
To enable IoT Wi-Fi link:
1. From the Basic menu, select Wi-Fi and then click IoT Network.
2. Move the selector to on.
3. If desired, enter a new name and password for the Wi-Fi network or
leave the default name and password that displays automatically.
4. Press Apply Changes to save the changes.
3.1 d/ WI-FI PROTECTED SETUP (WPS)
Wi-Fi Protected Setup (WPS) is an easier way for many devices to set up a
secure Wi-Fi network connection. Instead of manually entering passwords or
multiple keys on each Wi-Fi client, such as a laptop, printer, or external hard drive,
your Gateway creates a secure Wi-Fi network connection.
In most cases, this only requires the pressing of two buttons – one on your
Gateway and one on the Wi-Fi client. This could be either a built-in button or
one on a compatible Wi-Fi adapter/card, or a virtual button in software. Once
completed, this allows Wi-Fi clients to join your Wi-Fi network.
To initialize the WPS process, you can either press and hold the WPS button
located on the bottom of your Gateway for more than two seconds or use the UI
and press the on-screen button.
You can easily add Wi-Fi devices to your Wi-Fi network using the WPS option if
your Wi-Fi device supports the WPS feature.
To Next Page
Loading...
