Verizon XC46BE - Computer Network Configuration

COMPUTER NETWORK CONFIGURATION
WINDOWS 10
1. On the Windows desktop, click on the Start icon. Select Settings and
click Network & Internet.
2. In the Network & Internet, click Ethernet.
3. Select Network and Sharing Center. The View your basic network
information and set up connections window displays.
4. In the View your active networks, click Ethernet in the Connections field.
The Ethernet Status window displays.
5. Click Properties. The Ethernet Properties window displays.
6. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties. The
Internet Protocol Version 4 (TCP/IPv4) Properties window displays.
7. Click the Obtain an IP address automatically radio button.
8. Click the Obtain DNS server address automatically radio button, then
click OK.
9. In the Local Area Connection Properties window, click OK to save the
settings.
10. To configure Internet Protocol Version 6 (TCP/IPv6) to use dynamic
IP addressing, repeat steps 1 to 9. However for step 6, select Internet
Protocol Version 6 (TCP/IPv6) in the Properties option (refer to IPv6
section for Gateway configuration).
MACINTOSh OS x
1. Click the Apple icon in the top left corner of the desktop. A menu
displays.
2. Select System Preferences. The System Preferences window displays.
3. Click Network.