05 / CONFIGURING
ADVANCED SETTINGS
113
http://setup.verizon.com/businessinternetgateway |
©2024 Verizon. All Rights Reserved
2. Verify the following information:
General
• Status - displays the connection status of the network.
• Network – displays the type of network connection.
• Connection Type – displays the type of connection interface.
• Physical Address – displays the physical address of the network card
used for the network.
• MTU - specifies the largest packet size permitted for internet
transmissions:
– Automatic: set the MTU (Maximum Transmission Unit) at 1500.
– Automatic by DHCP: sets the MTU according to the DHCP
connection.
– Manual: allows you to manually set the MTU.
3. Click Apply to save changes.
EThERNET CONNECTION
You can view the properties of your Ethernet LAN connection using an Ethernet
cable inserted into one of your Gateway’s Ethernet LAN ports.
To view the connection settings:
1. To access the Ethernet properties page, click the Ethernet link listed
under Network name on the Network Connections page.
To Next Page
Loading...
