ADVANCED SETTINGS
• Width - displays the bandwidth available to the Wi-Fi channel
currently in use on each band. Users can select from available
channels.
• 802.11 Mode
You can limit the Wi-Fi access to your network by selecting the 2.4 GHz
and 5 GHz Wi-Fi communication standard best suited for the devices
you allow to access your Wi-Fi network.
Select the Wi-Fi mode as follows:
• Compatibility – This is the default mode setting on 5 GHz, providing a
good balance of performance and interoperability with existing Wi-Fi
devices. 802.11a,n,ac,ax and be devices can connect.
• Legacy – This is the default mode setting on 2.4 GHz, providing broad
connection support for old and new Wi-Fi devices. 802.11b,g,n,ax and
be devices can connect.
Notes:
802.11n is available on both 2.4 GHz and 5 GHz frequencies.
Connecting 802.11a, b or g devices will cause your Wi-Fi network to slow on
that radio and is not recommended.
To view the channel settings history:
1. From the Advanced menu, select Wi-Fi and then click Radio
Management.
2. Click on History to display the channel settings history.
To Next Page
Loading...
