Vertiv Avocent AutoView 2108 User Manual

NOTE: When it is initially connected, a device will not appear in the Names list until it is turned on. Once
an initial connection has been made, it appears in the Names list even when turned off.
To access the OSCAR interface Names dialog box, activate the OSCAR interface and click Setup - Names.
NOTE: If new IQ modules are discovered by the switch, the on-screen list is automatically updated. The
mouse cursor will change into an hourglass during the update. No mouse or keyboard input is
accepted until the list update is complete.
To assign names to devices:
1. In the Names dialog box, select a device name or port number and click Modify to open the
Name Modify dialog box.
2. Type a name in the New Name box. Names of devices can contain all printable characters.
3. Click OK to assign the new name.
4. Repeat steps 1-3 for each device in the system.
5. Click OK in the Names dialog box to save your changes.
-or-
Click X or press Escape to exit the dialog box without saving changes.
3.2.6 Configuring network settings
Use the Network dialog box to set the Network Speed, Transmission Mode and Network Configuration
feature.
To change network settings:
1. If the OSCAR™ interface is not open, press Print Screen to open the Main dialog box.
2. Click Setup - Network to open the Network dialog box.
3. Make desired changes and click OK to confirm or click X to exit without saving.
NOTE: Changing the network settings will cause the switch to reboot.
4. Click OK in the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved to the switch until you click OK in
the Device Modify dialog box.
NOTE: Changes made in the Name Modify dialog box are not saved to the switch until you click OK in
the Names dialog box.
NOTE: If an IQ module has not been assigned a name, the EID is used as the default name.
3.3 Commands Dialog Box Functions
From the OSCAR interface Commands dialog box, you can manage your switch system and user
connections, enable the Scan mode and update your firmware.
3 Local OSCAR™ User Interface
25

Vertiv Avocent AutoView 2108 Specifications

General

Brand	Vertiv
Model	Avocent AutoView 2108
Category	Switch
Language	English