Vertiv Avocent AutoView 2108 User Manual

3.2.2 Controlling the status flag 23
3.2.3 Setting the keyboard country code 24
3.2.4 Assigning device types 24
3.2.5 Assigning device names 24
3.2.6 Configuring network settings 25
3.3 Commands Dialog Box Functions 25
3.3.1 Selecting devices for scan mode 26
3.3.2 Enabling or disabling scan mode 26
3.3.3 Viewing and disconnecting user connections 27
3.3.4 Displaying version information and upgrading firmware 27
4 OBWI Operation 29
4.1 Using the OBWI 30
4.2 Viewing System Information 30
4.3 Generating a Certificate 31
4.4 Tools - Rebooting and Upgrading 32
4.4.1 Rebooting the switch 32
4.4.2 Upgrading switch firmware 32
4.4.3 Saving and restoring configurations and user databases 33
4.5 Property Identity and Location Settings 34
4.6 Viewing Version Information 34
4.7 Network Settings 34
4.8 SNMP Settings 35
4.9 Auditing Event Settings 36
4.10 Setting Event Destinations 36
4.11 Ports Settings - Configuring an IQ Adaptor 36
4.11.1 Deleting IQ adaptors 36
4.11.2 Upgrading IQ adaptors 37
4.12 Launching a Session 37
4.12.1 General sessions settings 37
4.12.2 Local user account settings 38
4.12.3 Virtual media session settings 39
4.13 DSView™ Software Settings 40
4.14 Active Sessions 40
4.15 Closing a Session 40
5 KVMVideo Viewer 41
5.1 Virtual Media Sessions 41
5.2 KVM Session 41
5.3 Performance Errors 41
5.4 Java Versions 41
5.5 Opening a KVM Session 42
Vertiv™ | Avocent® AutoView ™ Switch for Dell Installer/User Guide
ii

Vertiv Avocent AutoView 2108 Specifications

General

Brand	Vertiv
Model	Avocent AutoView 2108
Category	Switch
Language	English