VHF K5+ - Installation Site Selection

5.2 Choosing the installation site
The installation site must meet the following criteria:
n
Firm and even surface, must be able to carry the
weight of the machine.
n
Alternating current source.
n
An operational Residual Current Device/ Ground
Fault Circuit Interrupter on the electric circuit of
the machine.
n
Machine requires an external air extraction system.
n
Machine requires an external compressed air sup-
ply.
n
Access to the internet and local computer network
via cable.
You can find specific values and additional require-
ments in the chapter on technical data.  Technical
data – on page14
Distances to maintain
NOTICE
Damaging of the machine if
safety distances are not
maintained
If you do not maintain the safety distances, the
movable parts of the housing can collide with
obstacles when being opened and get damaged. If the
ventilation openings are covered, the machine may
overheat and get severely damaged.
Ensure that the following safety distances are always
maintained.
FIG. 10 DISTANCES TO MAINTAIN
Original Operating Instructions:K5+
Version: 12/16/2021
K5+ – Installing the machine
EN 16