VHF K5+ - Page 4

8.13 Replacing the clamping system of the blank holder 49
8.14 Updating the software and firmware 51
8.14.1 Updating the manufacturing software 51
8.14.2 Updating the firmware of the machine 51
8.15 Maintenance table 52
9 Disposal 54
9.1 Disposing of the machining residues 54
9.2 Disposing of the machine 54
10 Troubleshooting 55
Index 58
Original Operating Instructions:K5+
Version: 12/16/2021
Contents
EN 4