42
Operation
> Take the bolts previously removed and fit them as shown to both
sides of the machine.
> Check that the protection is secured so that it cannot drop.
N
OTE
!
This ensures that the protection is secured so that it will not drop and
strike anyone during maintenance, cleaning or servicing work on the
rotor.
The rotor can be set to 2 speeds: 600 rpm or 940 rpm.
The recommended rpm for the rotor should be as follows:
Rotor rpm
Changing the rotor rpm is done in the following way:
> Turn the handle to the desired speed on the rotor.
Type of crop Rotor
Rpm
Normal, clean grass crops and crops with moder-
ate amounts of leaves
940
Lush and leafy spring crops as well as alfalfa and
clover
600
Symbol on the
transmission
Explanation
"H" High speed = 940 rpm.
"L" Low speed = 600 rpm.
Handle
Symbol
To Next Page
Loading...
