VIDEOJET 3140 - 4.6 The Structure of the Laser System

Determining the correct parameters requires profound knowledge and experi-
ence, because the parameters highly depend on the application and the material
which shall be marked. In case of questions please contact us.
The parameters for individual materials are combined in parameter sets. Parame-
ter sets can be generated and altered using the software. For detailed information
on the parameters please refer to the manual of the marking software.
4.6 The Structure of the Laser
System
The laser system consists of the supply unit (1) and the marking unit. The mark-
ing unit comprises the laser head (2) and the marking head (3). The supply unit is
controlled via:
• the Handheld
• the Smart Graph software on a PC
• the Touch PC
• the CLARiTY Laser Controller
Optionally, a beam turning unit can be installed between laser head and marking
head.
Videojet 3140
09/17 - Index: AD [EN]
27
Videojet 3140/3340/3640/4 Description of the Laser System