6 Maintenance
6.1 General Notes Concerning
Maintenance
The time for maintenance of the laser system is very short. Please carry out
maintenance works in the stated intervals.
The laser system is designed such that maintenance can be performed safely.
CAUTION
Maintenance has to be performed by instructed operating and maintenance per-
sonnel only!
For reasons of safety make sure that the main key is withdrawn and the mains is
disconnected!!
Before cleaning the laser system and its environment, the laser system must be
disconnected from the mains power supply.
Document the regular maintenance in the maintenance protocols in this chapter!
In case of non-conformance with the maintenance plan Videojet Technologies
Inc. reserves the right to limit the warranty!
NOTICE
Before carrying out the maintenance works at the optics, please note the follow-
ing:
Acetone is not included upon delivery and has to be purchased via other compa-
nies. Open the following Internet page to order acetone in a quick and uncompli-
cated way: www.vwr.com/index.htm
When purchasing acetone make sure that you order acetone pro analysi (p.a. =
highest purity grade).
6.2 Maintenance Plan
The maintenance intervals are laid out considering laser system use of approxi-
mately 10 hours of daily operation on a normal working environment.
If the time of daily use exceeds 10 hours of continuous operation or in case of
above normal dusty/dirty environment please shorten the maintenance intervals
accordingly. In case of questions please contact Videojet Technologies Inc. or
one of their representatives.
All maintenance works are described in the following sections.
09/17 - Index: AD [EN]
42
Videojet 3140/3340/3640/6 Maintenance
To Next Page
Loading...