Marking contents The marking content defines the layout of the marking,
e.g. text elements, logos, serial numbers, fonts, etc.
Parameter set Parameter sets adjust the laser system to the respective
material of the product. A parameter set contains e.g. in-
formation on the laser power or the marking speed.
Product registration The product registration contains all data necessary to de-
tect the product and to trigger the marking process.
Positioning The positioning data defines the positioning and the size
of the marking on the product.
The combination of the four elements marking content, parameter set, product
registration and positioning within a template offers the possibility to adapt the
marking to different marking tasks in a very short period of time.
Examples:
• You want to mark a certain text on synthetic material instead of paper. Hence
you change your parameter set from »paper« to »synthetic material«.
• You want to change the position of the marking on your product. For that you
just change the positioning data directly in your template or in the user inter-
face »Laser Operation« under »Marking settings«.
09/17 - Index: AD [EN]
36
Videojet 3140/3340/3640/5 Operating the Laser System
To Next Page
Loading...