Document: LT0439 Vigilant MX1-Au Operator Manual
Issue 1.73 23 October 2018 Page vii
Mains Wiring __________________________________________ 11-5
Mains Wiring – 8U / 15U Cabinet __________________________ 11-5
Battery Wiring _________________________________________ 11-6
MX1 Controller Wiring ___________________________________ 11-7
MX Addressable Loop Wiring _____________________________ 11-8
AS 1668 Fan Control ____________________________________ 11-10
Alarm Devices _________________________________________ 11-11
Other MX1 Input and Output Wiring ________________________ 11-18
Zone LED Displays _____________________________________ 11-23
MX1 Networking _______________________________________ 11-24
Initial Power On ________________________________________ 11-32
Chapter 12 Specifications ................................................................ 12-1
General Specifications __________________________________ 12-1
MX1 Analogue Loop Compatible Devices____________________ 12-3
DDM800 Detector Compatibility ___________________________ 12-4
DIM800 Detector Compatibility ____________________________ 12-6
Compatible Batteries ____________________________________ 12-7
Detector Identification ___________________________________ 12-7
Equipment Point Descriptions _____________________________ 12-8
Ordering Codes ________________________________________ 12-20
Block Diagram _________________________________________ 12-21
To Next Page
Loading...