Manual VIPA System 200V About this manual
HB97E - CPU - RE_21x-1Bx06 - Rev. 13/20 1
About this manual
This manual describes the System 200V CPU 214-1BC06 and CPU 21x-
1BA06 from VIPA. Here you may find every information for commissioning
and operation.
Chapter 1: Basics and Assembly
The focus of this chapter is on the introduction of the VIPA System 200V.
Here you will find the information required to assemble and wire a
controller system consisting of System 200V components.
Besides the dimensions the general technical data of System 200V will be
found.
Chapter 2: Hardware description
Here the hardware components of the CPU
are described. The technical
data are at the end of the chapter.
Chapter 3: Deployment CPU 21x-1Bx06
This chapter describes the deployment of the CPU in the System 200V.
The description refers directly to the CPU and to the deployment in
connection with peripheral modules, mounted on a profile rail together with
the CPU at the backplane bus.
Chapter 4: Configuration with TIA Portal
In this chapter the project engineering of the VIPA CPU in the Siemens TIA
Portal is shown. The chapter only describes the basic usage of the
Siemens TIA Portal together with a VIPA CPU .
More detailed information about the Siemens TIA Portal is to be found in
the according online manual respectively documentation.
Overview
To Next Page
Loading...
Need help?
General
