Chapter 1 Basics and Assembly Manual VIPA System 200V
1-14 HB97E - CPU - RE_21x-1Bx06 - Rev. 13/20
Installation guidelines
The installation guidelines contain information about the interference free
deployment of System 200V systems. There is the description of the ways,
interference may occur in your control, how you can make sure the
electromagnetic digestibility (EMC), and how you manage the isolation.
Electromagnetic digestibility (EMC) means the ability of an electrical device,
to function error free in an electromagnetic environment without being
interferenced res. without interferencing the environment.
All System 200V components are developed for the deployment in hard
industrial environments and fulfill high demands on the EMC. Nevertheless
you should project an EMC planning before installing the components and
take conceivable interference causes into account.
Electromagnetic interferences may interfere your control via different ways:
• Electromagnetic fields (RF coupling)
• Magnetic fields with power frequency
• I/O signal conductors
• Bus system
• Current supply
• Protected earth conductor
Depending on the spreading medium (lead bound or lead free) and the
distance to the interference cause, interferences to your control occur by
means of different coupling mechanisms.
One differs:
• galvanic coupling
• capacitive coupling
• inductive coupling
• radiant coupling
General
What means EMC?
Possible
interference
causes
To Next Page
Loading...
Need help?
General
