Manual VIPA System 200V Chapter 3 Deployment CPU 21x-1Bx06
HB97E - CPU - RE_21x-1Bx06 - Rev. 13/20 3-1
Chapter 3 Deployment CPU 21x-1Bx06
This chapter describes the deployment of the CPU in the System 200V.
The description refers directly to the CPU and to the deployment in
connection with peripheral modules, mounted on a profile rail together with
the CPU at the backplane bus.
Topic Page
Chapter 3
Deployment CPU 21x-1Bx06........................................... 3-1
Assembly.............................................................................................. 3-2
Start-up behavior.................................................................................. 3-2
Addressing ........................................................................................... 3-3
Hints for the deployment of the MPI interface ....................................... 3-5
SIMATIC Manager - Limitations............................................................ 3-6
Hardware configuration - CPU.............................................................. 3-7
Hardware configuration - I/O modules .................................................. 3-9
Setting CPU parameters..................................................................... 3-10
Project transfer................................................................................... 3-14
Operating modes................................................................................ 3-18
Overall reset....................................................................................... 3-20
Firmware update ................................................................................ 3-22
Factory reset ...................................................................................... 3-24
VIPA specific diagnostic entries.......................................................... 3-25
Using test functions for control and monitoring of variables ................ 3-27
Overview
Content
To Next Page
Loading...
