VIPA CPU Series User Manual

Chapter 3 Deployment CPU 21x-1Bx06 Manual VIPA System 200V
3-12 HB97E - CPU - RE_21x-1Bx06 - Rev. 13/20
Enter the number of retentive memory bytes from memory byte 0 onwards.
Retentive values > 1024 are not allowed.
Enter the number of retentive S7 timers from T0 onwards. Each S7 timer
occupies 2bytes.
Enter the number of retentive S7 counter from C0 onwards.
These parameters are not relevant.
Here the priorities are displayed, according to which the hardware interrupt
OBs are processed (hardware interrupt, time-delay interrupt, async. error
interrupts).
Here the priorities may be specified according to which the time-of-day
interrupt is processed.
With priority "0" the corresponding OB is deactivated.
Activate the check box of the time-of-day interrupt OBs if these are to be
automatically started on complete restart.
Select how often the interrupts are to be triggered. Intervals ranging from
every minute to yearly are available. The intervals apply to the settings
made for start date and time.
Enter date and time of the first execution of the time-of-day interrupt.
This parameter is not supported.
Here the priorities may be specified according to which the corresponding
cyclic interrupt is processed. With priority "0" the corresponding interrupt is
deactivated.
Retentive Memor
y
Number of Memory
Bytes from MB0
Number of S7
Timers from T0
Number of S7
Counters from C0
Areas
Interrupts
Priority
Time-of-day
interrupts
Priority
Active
Execution
Start date / time
Process image
partition
Cyclic interrupts
Priority

VIPA CPU Series Specifications

General

Series	VIPA CPU Series
Communication Ports	Ethernet
Power Supply	24 V DC
Operating Temperature	0°C to +60°C
Certifications	CE, UL, cUL