PTZ user instructions
The telemetry function of the Quantum EVO can be controlled via 3different methods:
1. Front panel buttons
2. Remote control
3. Software viewer
Front Panel
Camera selection
The PTZ cameras can be controlled in either full screen or split screen mode. If in
Split screen mode, press the camera selection key , the camera icon will step from
one camera to the next on the split screen. When the icon appears on the camera to
be controlled then press the PTZ key .
If in full screen mode then simply press the PTZ key .
Pan and Tilt control
To move the dome left / right / up or down use the arrows keys .
Zoom and Focus control
To select Zoom and Focus press the Zoom Key , Zoom + =
Zoom - =
Focus Near =
Focus Far =
To Next Page
Loading...
