Infra Red Remote control functions
Camera selection
The PTZ cameras can be controlled in either full screen or split screen mode. If in full
screen mode press the camera selection key , the camera icon will step from one
camera to the next on the split screen. When the icon appears on the camera to be
controlled then press the PTZ key .
If in full screen mode then simply press the PTZ key .
Pan and Tilt control
To move the dome left / right / up or down use the arrows keys .
Zoom and Focus control
To select Zoom and Focus press the Zoom Key , Zoom + =
Zoom - =
Focus Near =
Focus Far =
Preset positions
3. To store a preset position
Move the camera to the required position then press the record key
followed by the number key of the preset to be stored (1 – 9)
To Next Page
Loading...
