Vista Viper - Page 77

VIPER-H4 user
manual V1.0
72
Basic > PoE Ports
To set the network PoE Ports
Figure 4-43 NETWORK > Basic > PoE Ports
Table 4-45 NETWORK > Basic > PoE Ports Item and Description
No.
Name
Function
1
DHCP Server
Select whether to enable DHCP server.
2
DHCP (Dynamic)
Select whether to use DHCP (Dynamic).
3
IP Address
Subnet Mask
Gateway
Enter the each information properly.
All manuals and user guides at all-guides.com