Vista Viper - Motion

VIPER-H4 user
manual V1.0
66
4.6.3 Motion
Motion > Setup
Figure 4-37 Event > Motion > Setup
Table 4-39 Event > Motion > Setup Item and Description
No.
Name
Function
1
CH
Display channels.
2
Use
Select/deselect whether to use motion function in the channel.
3
Area
Display the motion area.
4
Sens.
Select the sense level of the motion sensor (Level 1~10).
5
Beep
Select the duration of the buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1
min, 10 min, 30 min, and 1 hour).
6
Alarm
Set alarm output.
7
Group Rec.
Select the camera to record simultaneously.
8
Noti.
Set email notices.
9
Preset
Set preset of PTZ camera.
10
Copy to Motion
Setup
Copy motion set value to other channels. For more information about set
value copy, see section “4.5.2 Stream > Main Stream in Stream.”
Note
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing
icon( ) in right corner displays Event : Alarm screen. For more information about
Event : Motion screen, see section “4.6.2 Alarm In > Setup in Alarm In.”
All manuals and user guides at all-guides.com
all-guides.com