VIVOTEK - Built with Reliability
112 - User's Manual
The following information is shown with each event log:
1. Level: The following severity level can be applied to an event.
1-1. Error: Conguration errors such as lack of system memory or a faulty camera password.
1-2. Info: General information such as acquiring an IP from DHCP server.
1-3. Warning: Conguration and operation errors such as re-starting server service.
1-4. Cong: Events that are generated due to conguration changes, such as a change in
address or that to a camera conguration.
Below are some sample messages:
Event Level Source Message
DHCP renew
address
Info [service name] DHCP renew:
interface: [interface]
Address: [IP address]
Subnet mask: [subnet mask]
Gateway: [gateway]
DDNS result Info [service name] DDNS result: [OK/Failed]
Reboot Info User: [username] System reboot
System
shutdown
Info Power button System shutdown
Restore Info User: [username] Restore conguration
NTP time update Info [service name] NTP time update: [time offset]
Disk insert Info [service name] Disk inserted. [disk id]
Disk remove Info [service name] Disk removed. [disk id]
Firmware
upgrade
Info User: [username] Firmware upgrade
Recycle start Info [service name] Recycle start:
[volume name] [volume size] [volume
free]
Recycle start Info [service name] Recycle nish:
[camera id] [expired date] [recycle
date]