VIVOTEK - Built with Reliability
User's Manual - 65
Back-UPS
On line
75%
Once an UPS is connected via the USB interface, the NVR system supports the cooperating
protection against power outage. The UPS status [model name, status (Online or On battery),
battery charge level] is listed in the Maintenance page as shown below.
The NVR supports APC's Back-UPS and Back-UPS Pro series models.
Reactions on power outage:
When the UPS battery charge is lower than 10%, or can only sustain system operation for 3
minutes, the NVR system will automatically shut down. When the power source is restored, the
NVR system will automatically power up.
UPS support
To Next Page
Loading...
