Vivotek NR8401 - 3-6. Alarm

VIVOTEK - Built with Reliability
User's Manual - 99
The events reported from individual cameras' digital inputs, digital outputs, and motion detection
can be accommodated in the NVR system's alarm settings. The NVR also comes with DI and
DO pins. These events will then be reported or commanding to trigger corresponding actions as
follows:
1. Reporting events via Email or system buzzer.
2. Triggering video snapshot and text message by the occurrences of events to an FTP/HTTP
site.
3. Triggering the camera(s) for its lens to move to a preset position.
4. Triggering the cameras' or the NVR's digital output.
5. Alerting the administrator with alarms indicators on the Alarm panel.
You can create up to 16 instances of alarm.
3-6-1. General
3-6. Alarm
NR8401
LAN/WAN
VIVOTEK Network Cameras
Email
Alarms
Digital input/output
Motion detection
Event-triggered
recording
Web Console
Events triggered
FTP
HTTP
Buzzer
Preset positions
1
2
3
4
5
6
7
Digital input/output
7
7
Hardware connections to DIs or DOs, e.g., window sensors, should be made separately. The
motion detection conguration is also made via a web console with individual cameras.