Loop Key 81
XTS-IP / XTSc-IP Station User Guide March 2007
Loop Key
A station not having a direct appearance for a CO line will receive
incoming CO calls and transferred CO calls under the LOOP button. Only
one call at a time can be connected to a keyset on the LOOP button.
To make a Loop button:
1. Press the SPEED button twice.
2. Press the desired flexible button.
3. Dial [89], then press HOLD.
-or-
Dial [8889], then press HOLD, if using the Alt Dialing Plan.
Macro Buttons
Description
Speed bins can be programmed to accept macro functions that include
fixed button and flexible feature code functions. For example, a macro
can be programmed to a speed bin that includes a press of the Forward
button, dialing 6 for all calls forwarding, and a voice mailbox group
number where the calls are to be forwarded. The speed bin with the
macro is then assigned to a flexible button for one-button station
forwarding capability.
Operation
To create a Macro:
1. Press [SPEED] + [SPEED].
2. Dial a valid speed bin number.
3. Press the [MSG] button.
4. Press the desired buttons and enter the required digits for the task
to be performed.
5. Press [SPEED]. A confirmation tone sounds.
To Next Page
Loading...
