Voice Mail 113
XTS-IP / XTSc-IP Station User Guide March 2007
Voice Mail Transfer with ID Digits
While on a call and the caller on the other end wishes to leave a Voice
Message for another VM user:
1. At the initiating station, press the TRANS button.
2. Dial the Voice Mail Group number or press the preprogrammed VM
GROUP flexible button.
3. Dial VMID (mailbox location) of the desired party and go on-hook.
Voice Mailbox Button
To program a Mailbox flexible button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial the Mailbox feature code (460-467 = voice mail groups 1-8;
468 = remote voice mail group).
4. Dial the VMID number.
SINGLE LINE TELEPHONE
Not applicable
Voice Mail Group Button
To program a VM GROUP flexible button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial a 3-digit VM Group number (440-447=VM groups 1-8).
4. Dial the VMID number.
To Next Page
Loading...
