Vodavi XTSc-IP - Release Button; Redial; Last Number Redial; Save Number for Redial

Release Button 99
XTS-IP / XTSc-IP Station User Guide March 2007
Release Button
The Release Button feature allows the station user to speed up call
handling time by disconnecting calls while being off-hook.
Using the handset, while off-hook (not the speakerphone):
Press the preprogrammed RELEASE button [641] to terminate
intercom call, transfer sequence, page announcement or CO call.
Redial
Last Number Redial
To use Last Number Redial, either:
Press the preprogrammed LAST NUMBER REDIAL button (code 650).
-or
Press the SPEED button, then press the pound [#] key.
-or-
Use the Soft Key’s LNR option when in an idle condition.
-or-
Press the REDIAL button on an IP-24DH Phone.
Save Number For Redial
To save the last number you dialed:
1. After placing an outside call, keep the handset off-hook.
2. Press the SPEED button twice,
-or-
Use the Soft Key’s STORE NO option.