Vodavi XTSc-IP - Call Pickup; Directed Call Pickup

Call Pickup 41
XTS-IP / XTSc-IP Station User Guide March 2007
 SINGLE LINE TELEPHONE
To park a call:
1. Press the FLASH button. The caller is put on Exclusive Hold.
2. Dial parking location (424-437). A confirmation tone will sound.
3. If busy, press FLASH button twice and dial another park
location.
To retrieve a parked call:
1. Lift the handset and press the [#] button.
2. Dial parking location (424 to 437) where call was parked.
Call Pickup
A station can pickup a call ringing to any specific unattended station by
using the Directed Call Pickup procedure.
A station can pickup a call ringing to an unattended station within the
same ACD/UCD group by using the Group Call Pickup procedure.
Directed Call Pickup
To create a Pickup Button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button, then dial #0.
To use Directed Call Pickup:
1. Dial the station number of the known ringing telephone. Receive
ringback tone or call announce tone depending on the intercom
selector switch setting.
2. Press the preprogrammed PICKUP button to answer the call.