Night Service 87
XTS-IP / XTSc-IP Station User Guide March 2007
SINGLE LINE TELEPHONE
To create your name:
1. Dial [690] on the dial pad.
2. Enter the name (up to 7 characters may be entered) by using
keys on the dial pad.
3. Press the FLASH button to complete the programming process.
To erase your name:
1. Dial [690] on the dial pad.
2. Press the FLASH button to erase.
Night Service
To enter Night Service Mode, from an idle station:
Press the preprogrammed NIGHT SERVICE flexible button [604]. The
system is now in the Night Service Mode.
To remove Night Service Mode:
Press the preprogrammed NIGHT SERVICE flexible button [604]
again. The system is now removed from the Night Service Mode.
To Next Page
Loading...
