62 Flash
XTS-IP / XTSc-IP Station User Guide March 2007
Flash
When connected to an outside line:
Press FLASH to disconnect the outside line and reseize an outside
line dial tone.
» » » 8-button telephone users can assign a FLASH button by using
code [660].
Flash Key on Intercom
When connected to a page zone or another internal party:
Press FLASH to disconnect page or intercom call. An intercom dial
tone will sound.
Flexible Button Programming
To program a flexible button (to use feature codes):
1. Press SPEED twice.
2. Press the button to be programmed (must be programmed in
database as a flexible button).
3. Dial the desired code (refer to the “Default Numbering Plan” on
page 125, and the feature’s description for any additional digits to
enter). A confirmation tone will sound.
4. Press the ON/OFF button (SPEAKER button on IP Phone).
To program a flexible button (to use speed bin dialing):
1. Press SPEED twice.
2. Press the button to be programmed (must be programmed in
database as a flexible button).
3. Press the SPEED button.
4. Dial the speed bin number. A confirmation tone will sound.
5. Press the ON/OFF button (SPEAKER button on IP Phone).
To Next Page
Loading...
