Speed Dial 107
XTS-IP / XTSc-IP Station User Guide March 2007
SINGLE LINE TELEPHONE
To use speed dial:
1. Lift the handset.
2. Dial [668] on the dial pad.
3. Dial the desired station or system speed bin number.
4. Replace the handset to end the call.
To store speed dial numbers:
1. Lift the handset.
2. Dial [661] on the dial pad.
3. Dial the desired station speed number (9000-9019).
4. Dial the telephone number to store.
5. Press the FLASH button. A confirmation tone will sound.
System Speed Dial Access
The first programmed Attendant must enter the System Speed
numbers (9020 to 9999 or 9020-9099 for XTSc-IP). If an Attendant was
not specified, system speed numbers are entered at Station 100.
Stations can be individually allowed or denied the ability to use system
speed dial (9100-9999) numbers (System speed numbers 9060-9099 are
not monitored by toll restriction). Stations cannot be prevented from
using station speed dial.
Line Group 1 is programmed along with SLT speed
numbers, and thus Line Group 1 is used when
activating station speed dial from an SLT.
To Next Page
Loading...
