68 Intercom
XTS-IP / XTSc-IP Station User Guide March 2007
3. The called station then presses the flashing intercom button to
answer incoming intercom call. When answered, the following
message displays on the called station LCD:
Sta XXX can be a programmed station name.
SINGLE LINE TELEPHONE
Not applicable
Answering an Intercom Call
Depending on the selected intercom operating mode, answer the
intercom call as indicated:
H
andsfree Mode (No LED) -- You will hear three bursts of tone and an
announcement.
Reply handsfree or lift the handset for privacy.
T
one Mode (LED On) -- You will hear repeated bursts of intercom tone
ringing and HOLD button slow flashes.
Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone) to answer.
-or-
Press the H-T-P button to the H mode to answer.
P
rivacy Mode (LED Flashing) -- You will hear three bursts of tone and a
one-way announcement. The calling party cannot hear conversations in
progress.
Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone) to answer.
-or-
Press the H-T-P button to the H mode to answer.
CALL FROM STA XXX
MMM DD YY HH:MM am
Use feature code 667 to select an H, T, or P mode for
8-button digital telephones. Each use of this feature
code acts as a rotary through the three options.
To Next Page
Loading...
