70 Intercom
XTS-IP / XTSc-IP Station User Guide March 2007
To answer an Intercom Call:
In the T mode (LED On), you will hear repeated bursts of intercom tone
ringing and the HOLD button slow flashes.
Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone) to answer,
-or-
Press the H-T-P button to the H mode to reply.
In the P mode (LED flashes), you will hear three bursts of tone and one-
way announcement. The calling party cannot hear conversations in
progress.
Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone) to answer,
-or-
Press the H-T-P button to the H mode to reply.
In the H mode (No LED), you will hear three bursts of tone and an
announcement.
Reply handsfree or lift the handset for privacy.
SINGLE LINE TELEPHONE
To place an intercom call:
1. Lift the handset.
2. Dial the intercom number. You will hear ringing if the called
station is in the “T” answering mode or two bursts of tone if the
called station is in the “H” or “P” modes.
3. Hang up to end the call.
To answer an intercom call:
Lift the handset,
-or-
If your SLT is equipped with a speakerphone, press the Speaker
button to converse in a handsfree mode.