Off-Hook Voice Over (OHVO) 89
XTS-IP / XTSc-IP Station User Guide March 2007
The calling OHVO station is not connected or able to hear the
called station’s conversation (connection only allows calling
station to transmit to the called station).
To respond to an Off-hook Voice Over:
After receiving an OHVO announcement, select from the following
three options to respond to the caller:
Option 1 -- This method lets the receiving station respond to an
OHVO announcement utilizing the MUTE feature button. This
button is pressed to carry on a two-way conversation with the
OHVO initiator while still listening to the original call.
Option 2 -- The OHVO receiving station may respond to the calling
station by using the Silent Text Messaging (this feature is only
available to digital key telephones, and the calling station must be a
digital display telephone)
The OHVO receiving station may press a preprogrammed Message
button to respond to the voice over announcement without being
released from the current call (e.g., by pressing a flexible button
preprogrammed for the message IN MEETING, the calling station
receives this message on the LCD display).
Option 3 -- The OHVO receiving station may respond to the calling
OHVO station by using the Camp On feature. The OHVO receiving
station presses the flashing HOLD button to consult with the calling
station. The existing call (CO line) goes on Exclusive Hold
automatically. This method then follows Camp On procedures and
operation.
SINGLE LINE TELEPHONE
Not applicable
The calling station is placed in a one-time DND
mode upon initiating the Voice Over. One-Time
DND cannot be toggled during the OHVO call. The
station receiving the OHVO call must be off-hook
and in H mode.
IP Phones do not support the OHVO function.
To Next Page
Loading...
