Call Forward 37
XTS-IP / XTSc-IP Station User Guide March 2007
3. Dial the station number of the station from which forwarding is
desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls [8] = Busy[
] = Off-Net
[7] = No Answer [9] = Busy/No Answer
5. Dial the three- or four-digit destination number where calls are to
be forwarded (System Speed Bin (off-net only), Station, Voice Mail,
ACD/UCD, or Hunt Group). A confirmation tone sounds; five
seconds later a dial tone is received.
To remove Follow Me Call Forwarding (off-site location):
1. Dial into the system on a DISA or TIE trunk. Enter the DISA access
code, if applicable.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial the station number of the station that forwarding is to be
cancelled.
4. Dial [6] (regardless of the forward condition).
5. Redial the same station number. Confirmation tone sounds; 5 secs
later = dial tone.
To Next Page
Loading...
