Presentation
General
9
Cab
The cab has a heating and ventilation system with defrosting from
front and rear windows. Air conditioning is available as an option.
The cab have two emergency exits, the door and the rear window.
Anti-theft device (optional equipment)
An installed anti-theft device makes it more difficult to steal the ma-
chine. Volvo CE supplies anti-theft devices as optional equipment.
If your machine is not yet equipped with one, check the possibili-
ties of having such a device installed by your dealer.
FOPS and FOG
The cab is approved as a protective cab according to FOPS and
FOG standards, see
Protection from falling or scattering mate
-
rialon page 99. FOPS is an abbreviation of Falling Object Protec-
tive Structure (roof protection) and FOG is an abbreviation of
Falling Object Guard.
Never carry out any unauthorized alterations to the cab, e.g. low-
ering the roof height, drilling, welding on brackets for fire extin-
guisher, radio aerial or other equipment, without first having
discussed the alteration with personnel at the Volvo Engineering
Department. This department will decide whether the alteration
may cause the approval to become void.
It is important that all parties concerned are ware of these regula-
tions.
Modifications
Modifications to this machine including the use of unauthorized at-
tachments, accessories, assemblies or parts may affect the integ-
rity of the machine and/or the ability of the machine to perform as
designed. Persons or organizations making unapproved modifica-
tions assume all liability arising from or related to the modification,
including any adverse affect on the machine.
No modifications of any kind should be made to this product unless
the specific modification has been officially approved in writing by
Volvo Construction Equipment. Volvo Construction Equipment re-
serves the right to reject any and all warranty claims which arise
from or are related to unauthorized modifications.
Modifications are officially approved if at least one of the following
conditions is met:
1 The attachment, accessory, assembly or part is manufactured
or distributed by Volvo Construction Equipment and installed in
a factory approved manner as described in the publications
available from Volvo Construction Equipment; or
2 The modification has been approved in writing by the Product
Line Engineering Department of Volvo Construction Equip-
ment.
To Next Page
Loading...
