Service and maintenance
Track drive unit
189
Track drive unit
General
IMPORTANT
Always clean around the check plug before you check the oil
level. Dirt in the oil damages the track drive unit.
It is very important that the oil level is always correct and that it is
checked at working temperature.
Therefore remember:
— The track drive unit may not drive correctly and thus be dam-
aged if there is
too little oil.
—
Too much oil
makes the oil foam, which causes the track drive
unit to overheat.
WARNING!
Immediately after operating the machine, the oil is hot.
Allow the oil to cool. Residual pressure in the drive unit,
may cause the plug to be dislodged suddenly and oil to jet
out.
To Next Page
Loading...
