Operating instructions
Parking 127
Parking
General
IMPORTANT
Select level ground to park the machine. If it is unavoidable
to park on a slope, put a wood block under each track and
thrust the bucket teeth into the ground.
— Pay attention to the weather and take the appropriate steps, so
that the machine does not freeze to the ground, sink or suffer
any other consequences.
— Place switches and operating controls in the switched off/neu-
tral position.
— Move the safety locking lever down to lock the system securely.
See
Safety locking system on page 81.
— Close windows, lock the cab door and all covers.
— Turn OFF the battery master switch.
Long-term parking
Follow the instructions as for parking and in addition:
— Check the machine for leakage of oil or water, and defects of
the attachments and the tracks.
— Remove soil deposits and debris from the tracks and rollers.
— Rust proof exposed components, lubricate the machine thor-
oughly.
— Fill fuel and hydraulic tanks to the maximum marks.
To Next Page
Loading...
