Service and maintenance
Swing drive unit 187
Swing drive unit
General
IMPORTANT
Always clean around the oil level gauge before you check the
oil level. Dirt in the oil damages the swing drive unit.
It is very important that the oil level is always correct and that it is
checked at working temperature.
Therefore remember:
— The swing drive unit may not drive correctly and thus be dam-
aged if there is
too little oil.
—
Too much oil
makes the oil foam, which causes the swing
drive unit to overheat.
A
WARNING!
Immediately after operating the machine, the oil is hot.
Allow the oil to cool.
To Next Page
Loading...
