Presentation
Plates and decals
13
1 Product plate with Product Identification Number,
PIN
for the
complete machine (shows the model, serial numbers, machine
weight, engine output and when applicable CE approval). The
plate is positioned on the right side of the upper frame.
1A: Product plate, version for EU market
1 B:
Product plate, version for North America, International mar-
ket
1C: Product plate, version for Middle East market
2 The engine type designation, part and serial numbers are
stamped into both sides of the cylinder block.
3 The quickfit nameplate is attached on the outside of the quick-
fit. (shows part number and weight)
4 The bucket nameplate is attached on the top of the bucket.
(shows the bucket model order Number, serial number, bucket
part number, rated capacity, weight, cutting width, tooth part
number and adapter part number)
To Next Page
Loading...
