S86594
Instruments and controls
80
Operator seat
Air suspension seat (optional equipment)
The operator seat is also available with air suspension for even
better comfort. The adjusting possibilities are the same as for a
mechanical suspension seat except adjustment of air suspension.
To adjust air suspension of the seat,
1 Turn the ignition key ON" or start engine.
2 Lift operator's weight off the seat.
3 Press and hold the valve (2) until air bag is completely in-
flated.
4 Sit and pull on the valve (2) to deflate.
5 Stop deflating when seat starts lowering.
NOTE! After adjusting the suspension with operator's weight,
the suspension height should be in the position within sus-
pension stroke.
Seat belt
WARNING!
Change the belt immediately if it is worn, damaged or if the
machine has been involved in an accident where the belt
had to take some strain.
•
Modifications to the belt or its mountings are not permitted.
•
The seat belt is intended for one adult person only.
•
Change the belt every three year regardless of its condition.
When the seat belt needs to be washed:
— Use a mild soap solution
— Allow the belt to dry while it is fully pulled out, before rolling it
up.
— Make sure the belt is fitted in a correct way.
To Next Page
Loading...
