Presentation
10 Plates and decals
VOE 2134355130
Plates and decals
Product plates
This illustration and text below show which product plates are
found on the machine.
When ordering spare parts and when making enquires by tele-
phone or correspondence, the model designation and Product
Identification Number (PIN) should be stated.
1 Product plate with Product Identification Number, PIN for the
complete machine (shows the model, serial numbers, machine
weight, engine output and when applicable CE approval). The
plate is positioned on the right side of the upper frame.
1A: Product plate, version for EU market
1B: Product plate, version for North America, International mar-
ket
1C: Product plate, version for Middle East market
2 The engine type designation, part and serial numbers are
stamped into both sides of the cylinder block.
S82007
Volvo Construction Equipment
Volvo Construction Equipment Korea Ltd.
1, Guehyun-Dong, Changwon-City, Kyungnam, Korea 641-430
Model/Type
Product
Identification
Number
Machine mass Kg
Engine net power KW
14880000
Manufacturing year
Volvo Construction Equipment
Volvo Construction Equipment Korea Ltd.
1, Guehyun-Dong, Changwon-City, Kyungnam, Korea 641-430
Model/Type
Product
Identification
Number
Machine mass Kg
Engine net power KW
14880002
Manufacturing year
Volvo Construction Equipment
Volvo Construction Equipment Korea Ltd.
MANUFACTURED IN KOREA
1, Guehyun-Dong, Changwon-City, Kyungnam, Korea 641-430
Model/Type
Product
Identification
Number
14880001
2
3
4
1B
C.I.D./L CPL
Engine Seria NO
Engine Model
Fuel rate at rated HP
Timing-TDC
Cust Spec
Family
Low idle RPM
Valve lash cold
Firing Order
Rated HP/kw
Volvo Construction Equipment
Volvo Construction Equipment Korea Ltd.
MANUFACTURED IN KOREA
1, Guehyun-Dong, Changwon-City, Kyungnam, Korea 641-430
Part Number
Weight kg
14880004
Volvo Construction Equipment
Volvo Construction Equipment Korea Ltd.
MANUFACTURED IN KOREA
1, Guehyun-Dong, Changwon-City, Kyungnam, Korea 641-430
Bucket model order No.
Bucket part No.
Serial No.
Rated capacity(ISO/SAE)
Weight
Cutting width
Tooth part No.
Adapter part No.
14880005
1A 1C
To Next Page
Loading...
