Volvo EC330B - Specifications

Specifications
180 Specifications
VOE 2134355130
Specifications
Engine
Maker Volvo
D12CECE2
Type 4–stroke, 6–cylinder, straight, water
cooled, direct injection, diesel engine,
turbocharger, after cooled
Rated output 250 PS/ 1700 rpm
Maximum torque (Net) 138 kgf·m/ 1275 rpm
Bore ×Stroke 120.65 mm × 140 mm
Total displacement 12.13 l
Compression ratio 18.5 : 1
Low idle (No-load) 700 ± 40 rpm
High idle (No-load) 1800± 40 rpm
Firing order 1– 5 – 3 – 6 – 2 – 4
Lubrication Forced circulation
Oil Pressure
(Low speed)
Min. 70 kpa (warm engine)
Oil Pressure (Rated) 300 ~ 600 kpa (warm engine)
Valve clearance Intake 0.2 mm Exhaust 0.5 mm
Fuel system
Nozzle pressure 25 + 0.8/0 Mpa
Fuel injection pump EUI (Electronic unit injector)
Fuel consumption (rated) 211 g/kw·hr
Electrical system
Starter 6.6 kW
Battery 12 V × 2ea
Horn sound level at 7m 100 ± 5 dB
Head light type Halogen (70 W)
Hydraulic system
Main pump
Model K3V180DTP
Displacement 2 x 185 cc/rev
Type Variable swash plate, Axial piston pump
Pilot pump
Type Fixed gear
Displacement 15.2 cc/rev
Relief pressure 40 kgf/cm
2
(569 psi)