Operating instructions
94 Start switch
VOE 2134355130
Start switch
The start switch (A) has three position.
Stop position
The engine stops immediately.
Running (preheating) position
When the switch is in this position:
– The electronics is started up
– The electronics is up and running
– The preheating will be connected.
IMPORTANT
Do not repeat to turn on and off the ignition key under engine
cooled (below 20 °C).
The preheating function still remains if you repeat to turn on
and off the ignition key when the engine is under 20 °C,
which may damage and fire cable.
Preheat the machine fully (by when the pointer of cooling
gauge on the instrument is within the range of ‘A’) to repeat
to tur n on and off the ignition key for service or other pur-
pose.
Starting position
When the switch is in this position
– The starter motor will be engaged.
See Safety locking system on page 60.
S82108A
A
S82301
S82302
C
H
S82339A
A
S82303
To Next Page
Loading...
