Operator Manual / 2. Safety
23
2.7 Safety features
The scanner has numerous safety features that are designed to protect the user.
IMPORTANT
The efficacy of these safety features cannot be guaranteed if the machine is used in a manner other than
what is outlined in the manual.
Feature Description
The ISO 361 warning symbol on the scanner signifies the potential presence of ionizing
radiation, specifically X-rays in this case.
This caution label indicates that the X-ray scanner produces high-energy X-rays when
energized, and that unauthorized use is prohibited.
This caution label indicates to the user to not insert any part of the body beyond the
curtains while X-rays are being generated.
This caution label indicates that the X-ray scanner may have more than one power
supply (specifically in the case where there is a backup uninterrupted power supply
installed). Both power supplies must be disconnected before servicing.
This label indicates the location of the main power breaker. The main power breaker
should always be switched off before servicing the scanner.
This symbol on the scanner indicates the earth grounding point on the machine.
© VOTI2020 / 900116-001
To Next Page
Loading...
