Configuration File Parameter Guide 103 Back to Contents
VCS752 Administrator and Provisioning Manual
Setting:
sip_account.x.park_variant
Description: Selects how the VCS752 handles call parking, depending on the service
provider. When the default "broadsoft" variant is selected, calls are
parked via a PFK and a feature access code. The target number for the
"park" request is formed by concatenating "Call Park FAC" of the
call-to-be-parked account and the value entered for the Park PFK.
When the "asterisk" variant is selected, calls are parked through a blind
transfer to a parking lot extension.The target parking lot extension will be
taken from the following order of priority (if both values exist):
Park PFK Value
Call Park FAC Value
Values: broadsoft, asterisk Default: broadsoft
Setting:
sip_account.x.preferred_ptime
Description: Enter the packetization interval time in milliseconds.
Values: 10, 20, 30, 40, 50, 60 Default: 20
Setting:
sip_account.x.call_rejection_response_code
Description: Select the response code for call rejection. This code applies to the
following call rejection cases:
User presses for an incoming call
DND is enabled
Phone rejects a second incoming call with Call Waiting disabled
Phone rejects an anonymous call with Anonymous Call Rejection
enabled
Phone rejects call when the maximum number of calls is reached
Values: 480, 486, 603 Default: 486
To Next Page
Loading...
